Scanrex HVP series of pumps is the perfect choice when pumping high viscosity materials such as adhesives, sealants and greases. The material is pumped directly from the original container whether it’s a 310ML cartridge, 20L bucket, 200L drum or special container.
The versatile Scanrex HVP series can be used either as a manual system or a PLC-ready system, ready to be integrated into a master system. If dispensing is required, the pump can be equipped with different kind of dispensing valves.
All data and characteristics mentioned in this booklet are by way of example only. Given flow capacities and material pressure are depending of; inlet air pressure, material viscosity, the hose dimensions and other equipment fitted after the pump outlet. Aplicator Group reserves the right to modify the products without prior notice.
Pump frame with control box
Double acting piston pump
Air motor with reversing valve
Air bleed valve for the pump body
Follower plate or pressure plate adapted to material container
Follower plate seal NEOPRENE*
* Different materials available
High pressure material hose PA or PTFE
Outlet block with manometer
Material pressure regulator, for a pulsation-free application
Low-level monitoring
Various dispensing valves
Volumetric dosing valve with high accuracy
Pneumatic operated handle
“PLC ready” version. Enables connection with a master system
Pump boby of stainless and acid proof steel
Valve seat/cone of hard metal
