The Scanrex 2K GMM HV is the ultimate solution for precise metering, mixing, and dispensing of two component materials. This advanced system is designed to handle high viscosity materials such as epoxy, polyurethane, silicone and MMA with high accuracy and efficiency. The system can be configured to suit a wide range of applications with flow rates from 5ml/minute up to 10 litres/minute at continuous flow. The Scanrex 2K GMM HV is a solvent free system.
The system is based on servo-driven gear pumps where the different combinations of motors and pumps ensures that the system can be configured for most flows and mixing ratios.
Ensure safety and reliability with extensive alarm control, including visual warnings and system stops for critical limits. Pot-life guard, torque limitation for motors and pressure sensors for A-and B-component is standard.
The system offers two different driving modes: continuous flow and shot dispensing.
Set the flow rate in ml/s. Start and stop the flow using the trigger, foot pedal, an external signal or control station.
Set the flow rate and shot size. Dispensing begins with the trigger, foot pedal, or an external signal and stops automatically when the selected shot volume is reached.
Each driving mode can be saved as a recipe for easy access. Recipes can include unique mixing ratios, and the operator can seamlessly switch between the two driving modes as needed.
All data and characteristics mentioned in this booklet are by way of example only. Given flow capacities and material pressure are depending of; inlet air pressure, material viscosity, the hose dimensions and other equipment fitted after the pump outlet. Aplicator Group reserves the right to modify the products without prior notice.
Bottom plate with wheels
2 pcs HVP pumps*
Servo-driven metering pumps (gear)
High pressure hoses PA or PTFE
2K Mixer valve with handle (pistol grip)
25 pcs plastic static mixers, adapted for specific material
Control system with functions such as;
– Recipe handling
– Pot-life guard
– Pressure monitoring
– Purge
FAT (Factory Accept Test) with actual material is always executed before delivery.
*Adapted for 310ml cartridge/sausage, 20L pail or 200L drum.
Heating system
Low-level monitoring
Swing arm with balance block
Foot pedal for start/stop of mixer valve
Stainless steel pumps
Adaptation for integration with a supervisory system
Mass flow meters
Log function for;
– Mass flow
– Date
– Recipe name
– Flow
– Mixing ratio (mass flow meters)
– Alarms
– Pressure
– Temperature (for heating system)
– Batch number
Mixing ratio: 100:10 to 100:100
Capacity: up to 10 litres/minute
Motors: Servo 400W / 750W
Gears: 10:1, 15:1, 20:1, 30:1
Gear pumps: from 0,05 cc/rev to 50 cc/rev
(standard from 0,3 – 12 cc/rev)
WxLxH approx. (stand. config.): 800 x 1200 x 1670 mm
Weight approx. (stand. config.): 300 kg
Pneumatic supply: 6-7 Bar
Air consumption: <20 l / min
Electricity supply (stand. config.): 230 VAC 50Hz, 16A
