The Scanrex 2K GMM E2 is the ultimate solution for precise metering, mixing, and dispensing of two-component materials. This advanced system is designed to handle both low, medium and high viscosity materials such as epoxies, polyurethanes and silicones with high accuracy and efficiency. The system can be configured to suit a wide range of applications with flow rates from 5ml/minute up to 10 litres/minute at continuous flow. The Scanrex 2K GMM E2 is a solvent free system.
The system is based on servo-driven gear pumps where the different combinations of motors, gears and gear pumps ensures that the system can be configured for most flows and mixing ratios.
Ensure safety and reliability with extensive alarm control, including visual warnings and system stops for critical limits. Pot-life guard, torque limitation for motors and pressure sensors for A- and B-component is standard.
The system offers two different driving modes: continuous flow and shot dispensing. Continuous flow: Set the flow rate in ml/s. Start and stop the flow using the trigger, foot pedal, an external signal or control station. Shot dispensing: Set the flow rate and shot size. Dispensing
begins with the trigger, foot pedal, or an external signal and stops automatically when the selected shot volume is reached. You can set up to three different flow rates for shot dispensing: a startup flow, a running flow, and a top filling flow.
Each driving mode can be saved as a recipe for easy access. Recipes can include unique mixing ratios, and the operators can seamlessly switch between the two driving modes as needed.
All data and characteristics mentioned in this booklet are by way of example only. Given flow capacities and material pressure are depending of; inlet air pressure, material viscosity, the hose dimensions and other equipment fitted after the pump outlet. Aplicator System AB reserves the right to modify the products without prior notice.
Bottom plate with wheels
2pcs pressure tanks*
Silica gel filter on the A- and B- component tank to absorb moisture
Servo-driven metering pumps (gear)
High pressure hoses PA or PTFE
2K Mixer valve with handle (pistol grip)
25 pcs plastic static mixers, adapted for specific material
Control system with functions such as;
– Recipe handling
– Pot-life guard
– Pressure monitoring
– Purge
FAT (Factory Accept Test) with actual material is always executed before delivery.
*Sizes available for 3–90 litre
Electric agitator with scheduled start/stop
Transfer pumps TRP, HVP or Membrane
Mass Flow meters
Heating system
Low-level monitoring
Static dynamic mixer
Swing arm with balance block
Bench stand for mixer valve
Foot pedal for start/stop of mixer valve
Vacuum degassing system for pressure tanks
Log function for;
– Mass flow
– Date
– Recipe name
– Flow
– Mixing ratio (mass flow meters)
– Alarms
– Pressure
– Temperature (for heating system)
– Batch number
Mixing ratio: 100:1,5 up to 100:100
Capacity: up to 10 litres/minute
Motors: Servo 400W / 750W
Gears: 10:1, 15:1, 20:1, 30:1
Gear pumps: from 0,05 cc/rev to 50 cc/rev
(standard from 0,3 – 12 cc/rev)
WxLxH approx. (stand. config.):
800 x 1200 x 1670 mm
Weight approx. (stand. config.): 260 kg
Pneumatic supply: 6-7 Bar
Air consumption: <20 l / min
Electricity supply (stand. config.):
230 VAC 50Hz, 16A
