Automatic dispensing system for one or two component adhesives

BARKVALL 3400

Automatic dispensing system type 3400 for sandwich panel manufacturing with one or two component adhesives and resins such as polyurethane, epoxy and ms-polymers. Designed for manufacturing of medium sized sandwich panels in individual or continuous production lines.

 

FUNCTION

System 3400 is designed for automatic dispensing of one and two component medium viscosity adhesives and resins for manufacturing of sandwich panels. The system pumps and spreads the adhesive evenly in a diamond pattern over the substrate surface and improves the quality of the final product, simplifies production and improves the working environment. System 3400 can be made either in fixed or mobile configuration. In fixed configuration the material is moved on a conveyor underneath the adhesive spreader and in mobile configuration the spreader rolls on rails on top of the conveyor. The system can be used both for single panel manufacturing or continuous panel production lines. Selection of configuration type depends on product, manufacturing process and speed, adhesive and press time. The machine system is automatic with start and stop at the panel edges and the dispensing speed is automatically adjusted to panel width, adhesive flow and coat weight. The machine is easily controlled at the operator panel with recipe handling of process parameters and panel dimensions. The system performs the spreading sequence after a press on the start button. The system can also be integrated into a present process line and superior control system. The system is suitable for industrial production of sandwich panels with skin material of steel, wood or plastic, and core material of plaster, rockwool, EPS, PEX etc. Suitable for products such as doors building elements, facade panels, etc. The system can be equipped with mass flow metering system or viscosity compensator system for enhanced adhesive quality control.

 

All data and characteristics mentioned in this booklet are by way of example only. Aplicator Systems reserve the righ to modify the products without prior notice.

 

BARKVALL 3400

 

FEATURES

  • Individual panel manufacturing

  • Large and small surfaces 1-15m2

  • Continuous line production

  • Width up to 3000mm

  • Automatic system with flow control

TECHNICAL DATA

Capacity: 50–500 g/m2
Conveyor speed: 1–10 m/min
Spreader speed: Up to 80 m/min
Spreader width: 150–500 mm
Req. air pressure: 5–7 bar
Req. air volume: 500–1500 l/min
Electrical power: 415 V, three face, 50 Hz
Viscosity: Up to 50,000 mPas (cp)
Container volume: 25, 200, 1500 kg
Machine weight: Approx. 350 kg
Dimensions: As per specification
Pumps: As per specification
depending on capacity
requirement and adhesive
selection

 

DOWNLOAD PRODUCT SHEET